A Stripe payment calculator estimates what you'll actually receive after Stripe's processing fees are subtracted from a sale — typically 2.9% plus $0.30 per transaction in the US, though that shifts for international cards, currency conversion, and faster payouts. The distinction that matters: Stripe charges you directly as the processor, while marketplace platforms like Gumroad or Paddle stack their own commission on top of processing costs — which is why a $1,000 sale can net $970 through Stripe or closer to $900 through a marketplace.
TL;DR:
- Stripe's standard US rate is 2.9% + $0.30 per successful card charge — a $1,000 sale costs $29.30, leaving you $970.70.
- International cards add 1%, currency conversion adds another 1%, and instant payouts cost 1% with a $0.50 minimum.
- Stripe doesn't take 20% of anything — that number comes from marketplace platforms layering commission on top of processing, not from Stripe itself.
- Most of what feels like "Stripe's cut" is actually interchange and card-network fees set by Visa, Mastercard, and card-issuing banks.
- Running your own Stripe account instead of a marketplace checkout keeps you near the 2.9% + 30¢ baseline instead of paying 5-13% in combined fees.
Table of Contents
- What a Stripe Payment Calculator Actually Computes (And What It Misses)
- How Much Is the Stripe Fee for $1,000? A Full Breakdown
- What Percentage Do Stripe Payments Take, and When That Number Changes
- Why Stripe Fees Feel High, and What They're Actually Paying For
- Does Stripe Take 20%? Where That Number Actually Comes From
- Stripe Direct vs. Marketplace Checkout: The Real Cost Comparison
- Running the Math Before You Set a Price
- Keep the 2.9%, Skip the Extra Commission
- Frequently Asked Questions
- Sources
What a Stripe Payment Calculator Actually Computes (And What It Misses)

A Stripe payment calculator takes a sale price and subtracts Stripe's processing fee to show you what lands in your bank account. For most US businesses, that fee is 2.9% of the transaction plus a flat $0.30, a rate Stripe publishes directly on its pricing page. Type in $50 and the calculator tells you Stripe keeps $1.75 and you keep $48.25.
What a basic calculator usually misses is that the 2.9% + $0.30 figure is the floor, not the ceiling. International cards, currency conversion, subscription billing, and instant payouts each add their own surcharge on top of the base rate. If you're pricing a product or forecasting revenue using only the headline number, you're going to overestimate what actually clears into your account — sometimes by a meaningful margin on cross-border sales.
How Much Is the Stripe Fee for $1,000? A Full Breakdown

On a standard US domestic card charge, Stripe's fee on $1,000 is $29.30 — 2.9% ($29.00) plus the flat $0.30 fee. You net $970.70. That math scales linearly for the base rate, but almost nothing stays at the base rate once a business starts taking international customers or offering faster payouts.
| Transaction type | Stripe's fee | Fee on $1,000 | You receive |
|---|---|---|---|
| US domestic card | 2.9% + $0.30 | $29.30 | $970.70 |
| International card | 3.9% + $0.30 | $39.30 | $960.70 |
| International card + currency conversion | 4.9% + $0.30 | $49.30 | $950.70 |
| ACH direct debit | 0.8%, capped at $5 | $5.00 (capped) | $995.00 |
| Instant payout (on top of card fee) | +1%, $0.50 minimum | +$9.70 | varies |
The ACH row is the one most sellers overlook. If you can route recurring or high-ticket payments through bank debit instead of cards, the $5 cap makes a $1,000 charge dramatically cheaper than any card rate — worth knowing if you sell $500+ packages or annual plans.
What Percentage Do Stripe Payments Take, and When That Number Changes

Stripe's advertised rate is 2.9% + $0.30 for standard card payments in the US, but "what percentage Stripe takes" depends on three things: the card network, the card's country of issuance, and whether currency conversion happens.
Card network and card type
Most major networks — Visa, Mastercard, Discover — fall under Stripe's standard domestic rate in the US. Rates can run higher in other countries or for certain premium and corporate cards, since interchange (the part that goes to the card-issuing bank) is higher on those cards regardless of which processor you use.
Cross-border and currency conversion
A card issued outside the business's home country adds 1% to the base rate. If the transaction also requires converting currencies — a customer paying in euros into a US Stripe account, for instance — that's another 1% on top. Stack both and a $1,000 international sale runs a $49.30 fee instead of $29.30.
Payout speed
Standard payouts (arriving on Stripe's normal 2-7 day schedule) carry no extra charge. Instant payouts, which move funds to a debit card or bank account within minutes, cost an additional 1% with a $0.50 minimum per payout. That's a cash-flow convenience fee, not a sales fee — it only applies when you choose to pull money out faster.
Why Stripe Fees Feel High, and What They're Actually Paying For
Stripe's 2.9% isn't pure profit sitting in Stripe's pocket. A large share of it passes straight through to the card networks and the bank that issued the customer's card, in the form of interchange. Visa and Mastercard publish public interchange tables, and rates on those tables commonly run between 1.5% and 2.6% before a processor adds anything at all — Stripe is paying that out before it keeps a cent.
Debit cards are regulated differently. Under the Durbin Amendment, enforced through Federal Reserve Regulation II, debit interchange for banks with more than $10 billion in assets is capped at 21 cents plus 0.05% of the transaction, with a possible 1-cent fraud-prevention adjustment. That's why debit transactions often cost noticeably less to process than credit transactions — the cap applies to the underlying interchange, not to what Stripe charges on top.
Disputes add another layer. Stripe charges $15 per chargeback dispute, refunded only if you win the dispute.
$15 per dispute — charged immediately whether you win or not, refunded only if you do.
That fee exists because disputes cost Stripe real money to process and adjudicate with the card networks, regardless of outcome. It's not padding; it's a pass-through of a cost that exists industry-wide.
Does Stripe Take 20%? Where That Number Actually Comes From
No. Stripe's processing fee has never approached 20% of a transaction for standard card payments — the real number sits between roughly 2.9% and 4.9% depending on card origin and currency conversion, as shown above. If you've seen "20%" attached to online payments, it almost certainly refers to a marketplace or platform fee, not Stripe's processing rate.
Zero. Stripe's own processing fee has never been 20% of anything — that number comes from the platform stacked on top of Stripe, not from Stripe itself.
Marketplace checkout platforms like Gumroad or Paddle route transactions through Stripe (or a similar processor) and then add their own commission for hosting the checkout, handling tax, and managing the customer relationship. By the time you combine their commission with the underlying processing cost, a seller's effective cut can land anywhere from 5% to over 13%, depending on the platform and plan. That combined number is what people are remembering when they ask about "20%" — it's a platform fee plus processing, not Stripe acting alone. For a full breakdown of one specific platform's math, see How Much Commission Does Gumroad Take? The Real Breakdown.
Stripe Direct vs. Marketplace Checkout: The Real Cost Comparison
The practical question isn't "what does Stripe charge" — it's "what do I lose by routing my checkout through a marketplace instead of my own Stripe account." Here's the same $1,000 sale run through four different setups.
| Checkout path | Fee structure | Cost on $1,000 | You keep |
|---|---|---|---|
| Stripe, direct account | 2.9% + $0.30 | $29.30 | $970.70 |
| Marketplace-style platform (commission model) | ~10% flat, commonly includes processing | ~$100 | ~$900 |
| Merchant-of-record checkout | ~5% + $0.50 | ~$50.50 | ~$949.50 |
| Self-hosted checkout into your own Stripe account | 2.9% + $0.30, plus a one-time software license | $29.30 per sale | $970.70 minus the license, once |
The marketplace and merchant-of-record rows include their commission for a reason — they're not just processing your card, they're hosting the page, handling some tax compliance, and taking a cut for the convenience. That's a legitimate trade-off for sellers who want zero setup. It's an expensive one for sellers doing real volume. If you've already outgrown that convenience, How to Stop Paying Gumroad Fees (Without Losing Sales) walks through what changes when you move off a marketplace, and One-Time License vs. SaaS Fees: What Actually Costs Less runs the long-term math on a flat license versus a recurring percentage.
Pro Tip: If you want customers to cover the processing fee instead of absorbing it yourself, don't just add 2.9% to your sticker price — that undercharges you, because you'd be paying the fee on top of the fee. Instead, divide your target net by (1 − 0.029) rather than multiplying by (1.029). On a $100 target, that's $100 ÷ 0.971 = $103.00, not $102.90 — a small gap that adds up fast at volume.
Running the Math Before You Set a Price
Before you lock in a price, run it through an actual calculator rather than estimating in your head, because the gap between the advertised 2.9% and your real cost compounds with volume. A creator selling 500 units a month at $40 each is moving $20,000 in gross sales. At Stripe's direct rate, that's about $730 a month in fees. Route the same volume through a 10% marketplace commission and you're paying roughly $2,000 a month for the exact same sales — a $1,270 monthly gap that exists purely because of where the checkout lives, not because of anything Stripe charges. For sellers also weighing crypto payment rails into that same calculation, Crypto Checkout Software for Small Business, Compared Honestly covers how wallet-based payments change the fee math entirely.
Keep the 2.9%, Skip the Extra Commission
ReplaPay is self-hosted checkout software: a one-time $299 license that lets you accept card and crypto payments directly into your own Stripe account and your own wallet, instead of routing sales through a marketplace that takes an extra cut on every transaction. You still pay Stripe's standard processing rate shown above — ReplaPay doesn't touch that number — but you stop paying a second fee on top of it. The license includes 12 months of updates and 30 days of setup support. The honest caveat: you're responsible for your own Stripe account and compliance, so if you want a platform to handle tax filing and customer-facing support for you, check the spec sheet against what a managed marketplace offers before switching. For the full numbers on how a flat license compares over a year of sales, see A Cheaper Alternative to Paddle & Gumroad, By the Numbers.
Frequently Asked Questions
How much is the Stripe fee for $1000?
At Stripe's standard US domestic rate of 2.9% plus $0.30, a $1,000 card charge costs $29.30 in fees, leaving you with $970.70. That number rises to $39.30 for international cards and $49.30 if currency conversion is also involved.
What percentage do Stripe payments take?
Stripe's baseline is 2.9% plus a flat $0.30 per successful US card transaction. International cards add 1%, currency conversion adds another 1%, and ACH bank debits run much lower at 0.8% capped at $5.
Why are Stripe fees so high?
Most of the fee isn't Stripe's profit — it's interchange paid to the card-issuing bank and assessment fees paid to Visa or Mastercard, both of which exist regardless of which processor you use. Stripe adds its own margin on top, but the bulk of a typical transaction fee is a pass-through cost set by the card networks.
Does Stripe take 20%?
No. Stripe's own processing fee has never been near 20% for standard card payments; the real figure sits between roughly 2.9% and 4.9% depending on card origin and currency. A 20% figure almost always refers to a marketplace platform's combined commission and processing fee stacked on top of Stripe, not Stripe acting alone.
Does Stripe charge a monthly fee for a standard account?
No, Stripe's standard pricing has no monthly or setup fee for a basic account — you pay per transaction. Optional add-ons like Billing, Radar for fraud teams, or custom enterprise pricing can introduce separate fees, so check Stripe's own pricing page for anything beyond basic card processing.
Can I negotiate Stripe's processing rate?
Stripe does offer custom volume-based pricing for larger businesses, typically negotiated directly through its sales team once a business processes significant monthly volume. For most independent sellers and small businesses, the published 2.9% + $0.30 rate is what applies, with no negotiation available at lower volumes.
Sources
- Stripe Pricing | Stripe
- Regulation II: Debit Card Interchange Fees and Routing | Federal Reserve
- Visa Interchange Reimbursement Fees | Visa
- Disputes and Fraud | Stripe Support
